DOERRIES VCE 2800-250 MC
|
Offer: |
4754 |
|
Make: |
DOERRIES |
|
Type: |
VCE 2800 / 250 MC |
|
New in: |
2011 - unused |
- - - - - - - - - - - - - - - - - - - - - - - - - -
|
Technical Data |
||
|
Table |
||
|
table diameter |
mm |
2.500 |
|
turning diameter max. |
mm |
2.800 |
|
swing |
mm |
2.800 |
|
turning height max. |
mm |
2.100 |
|
central centring |
mm |
250 H7 |
|
table with built-in slides |
No. |
4 |
|
loading capacity |
kgs |
25.000 |
|
C-axis |
degree |
0,001 x 360.000 |
|
C-axis – table speed |
rpm |
0,002 – 2,5 |
|
hydraulic clamping table |
Nm |
59.800 |
|
axial thrust bearing – diameter |
mm |
1.495 x 1.250 x 150 |
|
radial bearing - diameter |
mm |
680 x 460 x 100 |
|
Ram and Crossrail |
||
|
spindle speed max. |
rpm |
224 |
|
speed ranges |
No. |
2 |
|
travel – x crossrail support from centre of table to the right side |
mm |
1.550 |
|
travel – x from centre of table to the right side tool magazine |
mm |
2.270 |
|
travel – x crossrail support from centre of table to the left side |
mm |
- 1.550 |
|
travel – z (Ram stroke) |
mm |
1.500 |
|
Ram section |
mm |
250 x 250 |
|
boring diameter of Ram min. |
mm |
340 |
|
crossrail adjustment |
mm |
800 |
|
crossrail – raster distance |
mm |
100 |
|
crossrail – adjusting speed |
mm/min |
400 |
|
rapid motion – x-axis |
mm/min |
18.000 |
|
rapid motion – z-axis |
mm/min |
18.000 |
|
forward feed – x-axis |
mm/r |
0,1 – 18.000 |
|
forward feed – z-axis |
mm/r |
0,1 – 18.000 |
|
Tool Magazines |
||
|
disc type tool magazine – right side |
station |
25 / 20 / 10 |
|
disc type tool magazine – left side |
station |
54 |
|
Driven Tools |
||
|
spindle speed – drilling and milling max. |
rpm |
3.000 |
|
speed ranges |
No. |
2 |
|
tool holding fixture |
SK |
50 |
|
power requirement |
kW |
37 |
|
torque max. |
Nm |
1.230 |
|
tool magazine – left side / right side |
Station |
54 / 55 |
|
clamping force |
N |
25.000 |
|
Main Drive and Electric |
||
|
electrics – voltage / frequency |
V/Hz |
400/50 |
|
power requirement – spindle |
kW |
100 |
|
torque max. |
Nm |
44.900 |
|
cutting force – turning |
N |
50.000 |
|
Machine Dimension and Weight |
||
|
machine weight approx. |
kgs |
73.000 |
|
dimension of the machine approx. |
mm |
10.850 x 7.500 |
|
height of the machine over floor |
mm |
7.500 |
Technical Data without engagement – Subject to prior sale
Accessories and further information:
▪ CNC-Control System BOSCH REXROTH INDRAMAT MTX
▪ X and Z-axis with hydrostatic guideways
▪ threading without compensation chuck
▪ tool measurement
▪ tool magazine right side - with 25 vertical station for CAPTO C6 tools max.
--weight 8 kgs each tool and 20 horizontal station for CAPTO C6 tools max.
--weight 8 kgs each tool, 10 vertical station for 10 tool holder
▪ tool magazine left side – with 54 vertical station for SK 50 tools
▪ the machine is complete covered and with electrostatic air filter system ELBARON/IFS
▪ hydraulic
▪ electric cabinet
▪ coolant attachment with 900 l supply tank and 1.000 l clean water tank,
--1 pump with 20 l/min at 3 bar, 1 pump 20 l/min at 70 bar, with washing gun
▪ coolant through tools
▪ chip conveyor